Adjusting The Sunlight Sensitivity Threshold - SOMFY Easy Sun io Manual Del Usuario

Easy Sun io
- Display a motor or receiver (or « » all) to be added
or deleted from the group:
- :
If the box is checked, the motor or receiver is
added to the group (or all the motors and receivers
are added to the group).
If the box is unchecked, the motor or receiver is
deleted from the group (or all the motors and
receivers are deleted the group).
- Press and hold for 2 seconds until
-
5.2.2 Modifying a group's symbol
- Open the Easy Sun io by lifting the cover to access the
setting buttons.
- Select the group using
- The 5 groups drop down (4 manual groups and 1
automatic group).
-
-
and is displayed.
- Select the new symbol using
- The 6 symbols drop down:
(vertical blind),
(other).
- Display the chosen symbol.
- Press and hold for 2 seconds until
-
5.3 Adjusting the sunlight sensitivity thres-
hold
The sunlight sensitivity threshold, which has a default
setting, can be adjusted on the Easy Sun io.
Somfy recommends adjusting the threshold on a day
when the amount of sunlight corresponds to the level
required to activate sun protection.
This threshold is adjusted in manual mode:
- Open the Easy Sun io by lifting the cover to access the
setting buttons.
- :
- The Easy Sun io displays the set threshold.
- Adjust the threshold using
- To the left: less sun, to the right: more sun required to
trigger protection.
- The threshold scale displays the new setting.
- The green indicator light comes on when the selected
threshold is below the current level of sunlight.
- Press and hold for 2 seconds until
-
8
or :
or :
(awning),
(roller shutter), (venetian blind),
or :
disappears
0.5 s
2 s
(light),
disappears
2 s
disappears
2 s
Copyright © 2009-2011 Somfy SAS. All rights reserved.
0.5 s
0.5 s