Vortice VORT INVISIBLE MINI Manual De Instrucciones página 48

ENGLISH
12.3 Equipment start-up/shut-down
To start the equipment: Connect the machine to the main power supply.
CAUTION: It is possible to turn completely off the machine only by disconnecting it from the mains.
12.3.1 Operating mode selection
To increase speed: from the "HOME" page, press the [ ▲] key until one of the following texts is displayed: "Min",
"Max" . Each text displayed corresponds to a different speed of the fans and consequently one different scope.
To reduce the speed: from the "HOME" page, press the [▼] key, until the following text is displayed: "Min".
MIN
Ext + 5°C
Int + 18°C
Exh + 18°C Sup+ 18°C
12.3.2 "Main menu" page
Press the [], button from the "HOME" page to go to the "Main Menu" page.
From this new screen you can manage:
• Operations menu (allows some devices or some functions to be activated);
• Alarms (enables verification and management of any alarms);
• Configuration (enables date and time configuration);
• Info (enables viewing of software versions).
Use the [ ▲] and [ ▼]. keys to move from one line to another. The selected line is highlighted in black.
Use the []: key to go to the highlighted page.
Use the [X]: key: To exit from a page without saving.
MAIN MENU
USE MENU
ALARM
SETUP
INFO
a
After 2 minutes with no keys being pressed, the display returns to the "Home" page without
saving any changes.
12.3.3 "USE MENU" page
To access the User menu or the Installer menu: from the "Main menu," select the line "Operations menu" and
press the [] key. You will be asked to enter a password to access the User menu or Installer menu.
The credentials for access to them are as follows:
• 13 "USER" menu
• 23 "INSTALL" menu
12.3.4 User "Operations menu" page
Select the user "Operations menu", entering the password as shown in the figure.
From this new page you can manage:
• Bypass MAN:12 h forced activation of the function: "By-pass";
• Activation of the "Holiday" mode: appliance always active at 30% less than the minimum speed.
• Prog. Activation:activation of the programmed operation in the scheduled time slots.
• Auto:activation of automatic operation based on the relative humidity rate.
Use keys [ ▲] and [ ▼] to move from one row to another. The selected row is highlighted in negative contrast.
Use the key [] o activate or deactivate the function or device highlighted.
48
MAX
Man
04/06/19 08:31
MAIN MENU
USE MENU
ALARM
SETUP
INFO
MAX
HR% 70