Vortice VORT INVISIBLE MINI Manual De Instrucciones página 47

12.2 Pagina "Home"
Upon start-up, the display shows Vortice logo for about 10 seconds, then it goes to the "HOME" page. This page
allows you to view various data useful for controlling equipment. The data and information that the page can
display are indicated in the figure and table below.
1 Normally blank display area.
- "Bypass," when the relative function is activated.
2
- "No-Frost," when the relative function is activated.
Equipment operating status:
- Speed: "MIN", "MAX".
In the event of an alarm:
- with appliance blocked: "Alarm!" message alternated with
3
"Block!";
- without the unit lock: "Alarm!" Message.
See "Alarms" in the "Operation and Use" section.
"Holiday," when the relative function is activated.
- "Ext' Value of the outside air temperature (Example: Ext
4
+5°C) after pushing the button [II].
- "Int' Value of the indoor air temperature (Example: Ext
+22°C) after pushing the button [II].
- "Progr." if weekly programming is active, after the key is
5
pressed [I] (NON UK market).
- The message "Man." will appear if during weekly
programming the user manually varies the speed.
- "Exh" value of the exhaust air temperature (for example
6 Exh + 18°C) after the key is pressed [II].
- Date (for example 03/04/2023),after the key is pressed [I]
- "Sup" value of the supply air temperature after the key is
pressed [II]
7 - Time of day (i.e. 12:30), after the key is pressed [I].
- % show the set value of the hr, turns black when the value
treshhold has been exceeded.
The following picture is showing the different display areas
MIN
Ext + 5°C
Int + 18°C
Exh + 18°C Sup+ 18°C
MAX
Man
04/06/19 08:31
1
3
4
6 6 6
MAX
ENGLISH
2
5
7
HR% 70
47