Support Site; Bluetooth Status Indication; Installing The External Microphone; Pairing - Sony XNV-770BT Manual De Instrucciones

Ocultar thumbs Ver también para XNV-770BT:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

For details on compatibility of your device, visit
the support site.

Support site

http://esupport.sony.com
http://www.sony.com/mobileAV

Bluetooth status indication

XNV-770BT
Bluetooth signal indicator*
XNV-660BT
Bluetooth signal indicator*
* Lights up when the Bluetooth signal is on.
ATT
Calling...
Name
0123456789
15
Bluetooth status indications
None: No device is connected for
audio streaming purpose.
Flashing: Connection is in progress.
Lit: Connected to a device.
None: No cellular phone is connected
for handsfree calling purpose.
Flashing: Connection is in progress.
Lit: Connected to a cellular phone.
Signal strength status of connected
cellular phone.
Remaining battery status of connected
38
cellular phone.
Calling...
12:00

Installing the external microphone

To capture your voice during handsfree calling,
you need to install the external microphone
(supplied).
For details on how to connect the microphone,
see the supplied installation/connections manual.

Pairing

Pairing is required only the first time you connect
to a Bluetooth device (cellular phone, etc.).*
To pair this unit to a Bluetooth device, you need
to enter the same passkey*
the Bluetooth device. The passkey can be either
your own selected number or the number
determined by the Bluetooth device. For details,
see the manual of the Bluetooth device.
*1 If you delete the device registration from this unit,
you need to perform pairing again.
*2 Passkey may be called "passcode," "PIN code,"
"PIN number," "password," etc., depending on the
Bluetooth device.
Tip
You can pair up to 9 devices.

Searching from this unit

Check that the other Bluetooth device is set to
allow for searching (discoverable) beforehand.
1
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch "BT Phone" in the top menu.
To select Bluetooth Audio, touch "Source
List," then "BT Audio."
2
Touch "BT Menu."
In the case of Bluetooth Audio, touch "Play
Menu," then "BT Menu."
The Bluetooth setting menu appears.
Back
ATT
BT Menu
Signal
OFF
Discoverable
Hide
Device Name
Search
Device List
15
1
2
on this unit and on
Top
/ ON
/ Show
1/2
12:00
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Xnv-660bt

Tabla de contenido