Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Cooling On/Off
Your refrigerator
and freezer
will
not cool when cooling
is
turned
off.
To turn cooling
off, press and hold both the FAST COOL
and
MOISTURE
CONTROL
buttons,
at the same time,
for
3 seconds.
When
cooling
is off, the Cooling
Off
icon will
appear
on the display.
To turn cooling
back
on, press and hold
both
the FAST
COOL
and MOISTURE
CONTROL
buttons,
at the same time,
for 3 seconds.
When
cooling
is on, the Cooling
Off
icon will
disappear
and the previously
selected
settings
will be
displayed.
Additional
Features
Door Open Alarm
•
The Door Open
icon lights
up whenever
either
door
is
opened.
When either door is open for 5 minutes and cooling is on, an
alert tone will sound three times, and the Door Open icon
will flash seven times. This pattern will repeat every
2 minutes until all the doors are closed properly. The feature
then resets and will reactivate
when either door is left open
again for 5 minutes.
NOTES:
To mute the audible
alarm
while
keeping
the doors
open,
such as while
cleaning
the inside of the refrigerator,
press
any button
on the control
panel.
The alarm
sound will be
temporarily
turned
off, but the Door Open
icon will still be
displayed
on the dispenser
control
panel.
Both doors must be fully closed to turn off the Door Open
icon.
Fast Cool
The Fast Cool feature assists during times of high refrigerator
use, full grocery loads or temporarily
warm room temperatures.
•
Press FAST COOL to set the freezer and refrigerator
to the
coldest temperature
settings. Press FAST COOL again to
return to the selected temperature
set point.
NOTES:
•
The Fast Cool
icon will be illuminated
while
the
refrigerator
is in Fast Cool
mode.
The Fast Cool feature
will turn off automatically
after
24 hours.
Moisture Control
The moisture control feature
turns on a heater
to help reduce
moisture
on the door
hinge seal. Use in humid environments
or
when you notice
moisture
on the door
hinge seal. The
refrigerator
uses more energy when Moisture
Control is on.
•
To turn on the Moisture
Control feature,
press and hold
MOISTURE
CONTROL
for 3 seconds.
To turn off the Moisture
Control
feature,
press and hold
MOISTURE
CONTROL
for 3 seconds.
Air Filter Status Light and Reset
The filter reset control allows you to restart
the
air filter status
tracking feature each time you replace the air filter. See "Install
Air Filter."
•
Press and hold AIR FILTERfor 3 seconds, to reset the air filter
status to Good. The air filter icon will turn blue.
Control Panel Lock
The control
panel
can be locked
to avoid
unintentional
changes
to the settings.
NOTE:
The lock feature
does not shut off power
to the
refrigerator.
It simply
deactivates
the controls.
•
Press and hold LOCI(
for 3 seconds
to lock the controls.
The
Lock icon will illuminate
when
the control
panel
is locked.
•
Press and hold LOCI( for 3 seconds again to unlock the
controls.
REFRIGERATOR FEATURES
NOTE:
Your model
may have
some or all of these features.
important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature
changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size
pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
16
Tabla de contenido
