NOTES:
•
For best results, the load should be dry at the start of the cycle.
•
Stubborn and set-in stains might require additional pretreatment.
Ultra Clean cycle
Use this cycle for most loads to get between 6 and 15 minutes of
wash time. For heavily soiled clothes, select the CATALYST_
Cleaning Action cycle and the Heavy Duty speed setting.
Permanent
Press I cycle
A load cooling spray rinse reduces wrinkling. Use this 8 to 10
minute cycle for cleaning lightly to moderately soiled permanent
press blends and syththetic fabrics. Choose a slow spin speed
control setting such as Delicate to help reduce wrinkling.
Handwash
cycle
Use this 4 minute cycle for hand washable garments and select
one of the Handwash Speed Select settings for the best fabric
care.
Whitest Whites
Use this wash cycle for loads of white fabrics that need improved
whitening. This cycle includes the CATALYST®Cleaning Action.
For the best cleaning performance,
select the Heavy Duty Speed
setting. Bleach is recommended
in this cycle to provide
outstanding
whitening. Wash time is approximately
19 minutes.
Soak cycle
This cycle features agitation followed
by soak time to help
remove heavy soils and stains that need pretreatment.
After the
soaking has finished, you should reset the washer to a Spin
setting to remove water. The Soak cycle should be followed by an
Ultra Clean or Permanent Press cycle with additional detergent.
NOTE: Hot water is not recommended
for soaking. It may set
some stains. If using the CATALYST ®Cleaning Action, use of the
SOAK cycle is not needed.
This section describes the wash/spin speeds you can select with
the Speeds control, Each speed setting is designed for different
types of fabric and soil levels.
DEUCATE
NORMAL
SLOW/ SLOW
SLOW/ FAST
O
O
HANOWASH
@
_/st-
CASUAL o
o
HEAVYDUTY
EXIRA SLOWI SLOW
FASTI FAST
o
O
HANDWASHPLUS
HANGDRY
FINEDELICATES
FJwr I SLOW
INTERMITTENT
EXTRA SLOW/ SLOW
Speeds Selector knob
Normal speed
This speed setting is for normally soiled cottons and linens.
Setting combines slow speed agitation and fast spin speeds to
shorten drying time.
Heavy Duty speed
This speed setting is for sturdy or heavily soiled loads. Setting
combines fast speed agitation and fast spin speeds. For best
results, use this setting when the Cycle Selector Control (Timer)
knob is set on the CATALYSTe setting.
Hang Dry speed
This speed setting is for sturdy permanent press fabrics that will
be line dried. Setting combines fast speed agitation and slow
spin speeds to reduce wrinkling.
Handwash
Plus Fine Delicates
speed
Use this speed setting for hand washable and special-care items.
The wash action has repeating periods of extra-slow
speed
agitation and soaking. Slow spin speeds help reduce wrinkling.
NOTE: Do not use this cycle for large items such as blankets.
Some "Hand Wash" items, particularly wool, naturally shrink
when washed. When still wet, block these items by gently
stretching to original measurements.
Allow the items to dry flat.
Handwash/Casual
speed
This speed setting is for lingerie and loosely knit items. Setting
combines extra-slow
speed agitation for gentle soil removal and
slow spin speeds to reduce wrinkling.
Delicate speed
This speed setting is for washable knit fabrics and permanent
press fabrics. Setting combines slow speed agitation for gentle
soil removal and slow spin speeds to reduce wrinkling.
After using extra detergent in a cycle for heavily soiled clothes, or
when washing special-care
items, you may find that an extra
rinse and spin is needed.
1o Set the controls for Water Level, Water Temperature, Options
(to One Rinse), and Speeds.
2.
Push in the Cycle Selector Control (Timer) knob and turn it to
any of the rinse settings.
3.
Pull out the Cycle Selector Control (Timer) knob. The washer
fills to the selected water level, agitates, drains, and spins.
A drain and spin may help shorten drying times for some heavy
fabrics or special-care
items by removing excess water.
1. Set Options Control (to One Rinse).
2. Set Speeds Control:
•
For fast spin, use the Heavy Duty or Normal speed control
setting.
•
For slow spin, use the Delicate setting.
3.
Push in the Cycle Selector Control (Timer) knob and turn it to
any of the Spin settings.
4.
Pull out the Cycle Selector Control (Timer) knob. The washer
drains, then spins.
13