Idiomas disponibles
Idiomas disponibles
To dispense water:
1, Press a glass against the water dispenser lever.
2, Remove the glass to stop dispensing.
NOTE: Dispense enough water every week to maintain a
fresh supply.
The dispenser light
The dispenser area has a light. It can be turned on
manually by pressing the "ON" button at the right hand
side of the control panel. The red indicator above the "ON"
button will appear. On some models:
whenever you use
the dispenser the lever will automatically
turn the light on.
LIGHT
OFF
ON
NOTE: See the "Changing the Light Bulbs" section for
information on changing the dispenser light bulb.
On models without crushed ice, the light switch is a
rocker-style type. Push the switch to turn the light on, and
push again to turn the light off.
The dispenser lock (onsome models)
Your dispenser can be turned off for easy cleaning or to
prevent accidental dispensing by small children and pets.
To turn off the dispenser, press the LOCK button. The
indicator will appear above the LOCK button and the ice
and water dispensers will not work. To unlock the
dispenser, press the UNLOCK button until the indicator
appears. Then continue to dispense ice or water as usual.
I
ccc3
DISPENSER
LOCK
I
UNLOCKI
NOTE: The lock feature does not shut off power to the
product, to the ice maker, or to the dispenser light. It
simply deactivates the dispenser levers.
The shelves in your refrigerator are adjustable to meet your
individual storage needs. Your model may have glass or
wire shelves.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier. It will also
reduce the amount of time the refrigerator door is open,
and save energy.
IMPORTANT:
Do not clean glass shelves with warm water
when they are cold. Shelves may break if exposed to
sudden temperature changes or impact. For your
protection tempered glass is designed to shatter into many
small pebble-size pieces. This is normal.
NOTE: Glass shelves are heavy. Use special care when
removing them to avoid impact from dropping.
To remove shelves from the shipping position (shelves
are shipped
upside down):
.
.
.
4.
5.
6.
Grasp front of upper shelf with one hand and use other
hand to remove packing material from shelf area.
Lower front of upper shelf until shelf hooks can be
removed from slots in shelf supports on the back
refrigerator wall. Pull shelf forward to remove.
Flip shelf over.
Insert rear shelf hooks into slots in shelf supports.
Tilt front of shelf up until rear hooks drop into slots.
Lower front of shelf. Check to make sure that shelf is
securely in position.
Slide-out shelves (on some models)
Some shelves slide out, providing easier access to foods
stored in back.
To slide out shelf, carefully pull front of shelf toward
you.
To slide in shelf, push shelf in until it stops.
To remove a shelf from the metal frame:
1. Pull shelf out to the stop.
2. Tilt front of the shelf up and pull it out a little farther.
3. Lift up shelf so that it moves through the slot in the
frame.
Replace the shelf in the reverse order.
15
