Before Initial Use; Replacing The Battery; Mounting The Product - Auriol HG06544A-DCF Instrucciones De Utilización Y De Seguridad

Risk of damage to the product
Only use the specified type of battery/rechargeable battery!
Insert batteries/rechargeable batteries according to polarity marks (+) and (–)
on the battery/rechargeable battery and the product.
Use a dry lint-free cloth or cotton swab to clean the contacts on the battery/
rechargeable battery and in the battery compartment before inserting!
Remove exhausted batteries/rechargeable batteries from the product
immediately.
˜ Before initial use
1. Remove the battery from the box and plastic wrapper.
2. Insert the battery into the battery compartment
and then pushing down at the + contact.

Replacing the battery

1. Turn the product over. Place it on a soft underlay to avoid scratching the
surface.
2. Remove the battery and then insert a new battery according to the polarity
marks.
3. Insert the battery into the battery compartment
and then pushing down at the + contact.
4. The product is now ready for use.

Mounting the product

NOTE: You will require a screw and a dowel to mount the product as
these are not included with your product. You will also need an electric drill and
screwdriver.
NOTE: Make sure that the screw and dowel are suitable for the wall.
, placing first the – contact
5
, placing first the – contact
5
GB/MT 35