DeWalt DCE150 Manual De Instrucciones página 14

nut. NOTE: Nut should be tightened to 260 lb­in.
NOTE: A gear guide (N) on either side of the moving blade should be
replaced if damaged or worn.
OPERATION
WARNING: To reduce the risk of serious personal injury,
turn tool off and remove the battery pack before making any
adjustments or removing/installing attachments or accessories.
An accidental start-up can cause injury.
WARNING: CUT OR AMPUTATION HAZARD. Never have any
part of your body near the cutters or mechanism. Serious personal
injury may occur.
Installing and Removing the Battery Pack
(Fig. 5)
FIG. 5
NOTE: For best results,
make sure your battery
H
pack is fully charged.
To install the battery
pack (G) into the tool
handle, align the battery
pack with the rails inside
the tool's handle and slide
it into the handle until the battery pack is firmly seated in the tool and
ensure that it does not disengage.
To remove the battery pack from the tool, press the release button (H)
and firmly pull the battery pack out of the tool handle. Insert it into the
charger as described in the charger section of this manual.
Squeeze the tool trigger for three seconds to dissipate the slight
electric charge that may still be in the tool. The worklight may come
on for a brief moment.
G
12
FUEL GAUGE BATTERY PACKS (FIG. 6)
Some D WALT battery packs include a fuel gauge which consists of
e
three green LED lights that indicate the level of charge remaining in
the battery pack.
The fuel gauge is an indication of approximate levels of charge
remaining in the battery pack according to the following indicators:
75–100% charged
51–74% charged
< 50% charged
Pack needs to be charged
To actuate the fuel gauge, press and hold the fuel gauge button (X). A
combination of the three green LED lights will illuminate designating
the level of charge left. When the level of charge in the battery pack is
below the usable limit, the fuel gauge will not illuminate and the battery
pack will need to be recharged.
FIG. 6
X
NOTE: The fuel gauge is only an indication of the charge left on the
battery pack. It does not indicate tool functionality and is subject to
variation based on product components, temperature and end­user
application.