Dimmer Function; Snoozefunction - Roadstar CLR-2285/WD Manual De Instrucciones

button for 8 seconds and the OUR digits will flash. Press UP/
DOWN (4-9) to adjust the HOUR digits.
3. To set the ALARM MINUTE, press ALARM 1 (7) or ALARM 2 (8)
button once more and the MINUTE digits will flash. Press UP/
DOWN (4-9) to adjust the MINUTE digits.
4. To set the days 1-5, press ALARM 1 or ALARM 2 button Button
and the 1-5 digits will flash. Press UP/DOWN (4-9) to adjust
between 1-5 (Monday to Friday), 1-7 (whole week), 6-7
(Saturday and Sunday) or 1-1 one day of week.
5. To set the BUZZER or RADIO Alarm Mode, press ALARM 1 (7) or
ALARM 2 (8) button one more time and the BU (Buzzer) digits
will flash. Press UP/DOWN (4-9) to adjust between BU (Buzzer)
or Radio Frequency.
6. To disable the Alarm mode, during normal display mode keep
pressed the Alarm 1 (7) or Alarm 2 (8) buttons for 5 seconds until
the symbols disappear from the display.

DIMMER FUNCTION

1. Press quickly the SNOOZE/SLEEP/DIMMER (2) button to
change the Display intensity.
DAYLIGHT SAVING TIME (D.S.T.)
1. During normal clock mode, press for 3 seconds the DST (9)
button until the display advance by one hour (Summer time).
Press again 3 seconds to go back one hour (Winter Time).
AUTO TOGGLING BETWEEN DISPLAY MODE
English 5 6
1. In normal clock mode, press the button (4) for 3 seconds
2.
FM PLL RADIO
1 . Make sure the antenna wire (10 is completely unrolled and
2 . In normal clock mode, press the ON / OFF button (1) to switch
3 ) Press the UP / DOWN (4-9) button to search for the station. Short
4 . To save the channel, press the MEM / M + (3 ) 5 seconds to
5 . After selecting the desired channel , press the MEM / M + button
6 . To recall radio stations , press the MEM / M + button (3)

SNOOZEFUNCTION

When the alarm sounds, pressing the SNOOZE Button (2) will temporary
stop about 9 minutes then the alarm sounds again.
English
until ON compare in the display. The unit show
sequentially the Hour / Date and Year.
To exit from this function, press again the button (4)
for 3 seconds.
extended.
on the radio.
press mode is MANUAL research, press and hold that the search
mode is automatic.
enter the memory of the radio station , then press UP / DOWN
(4-9) to select the desired channel number where you want to
save the station.
(3) to confirm the location of the memory.
sequentially until the desired channel is displayed.