Idiomas disponibles
Idiomas disponibles
30 | English
Noise emission values determined according to EN IEC 62841-2-3.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K determined according to EN IEC 62841-2-3:
h
Surface grinding and abrasive cutting:
a
h
K
Disc sanding:
a
h
K
A)
Determined for a diameter of 125 mm
Noise emission values determined according to EN IEC 62841-2-3.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K determined according to EN IEC 62841-2-3:
h
Surface grinding and abrasive cutting:
a
h
K
Disc sanding:
a
h
K
A)
Determined for a diameter of 125 mm
Grinding thin metal sheets or other materials that tend to easily vibrate with a large surface area can cause the noise emission
value to increase by up to 15 dB. Suitable, heavy damping mats can reduce the increased noise emissions. Increased noise
emissions must be taken into consideration, both for the risk assessment of the noise output and for selecting suitable hearing
protection.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
1 609 92A 69Z | (06.10.2022)
GWS 17-125 TS GWS 17-125 S INOX GWS 17-150 S GWS 17-125 SB
dB(A)
94
dB(A)
102
dB
3
2
m/s
5.5
2
m/s
1.5
2
m/s
3.5
2
m/s
1.5
GWS 17-125 PS
3 601 GD1 3..
dB(A)
94
dB(A)
102
dB
3
2
m/s
5.5
2
m/s
1.5
2
m/s
3.2
2
m/s
1.5
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
95
95
103
103
3
3
5.4
8.0
1.5
1.5
A)
2.7
3.5
1.5
1.5
GWS 17-150 PS
GWS 17-125 PSB
3 601 GD1 6..
3 601 GD1 7..
94
102
3
4.6
1.5
A)
3.5
1.5
Bosch Power Tools
95
103
3
4.6
1.5
3.2
1.5
94
102
3
4.8
1.5
3.2
1.5
