Honda XR250 Tornado Manual Del Propietário página 177

80
Removal
1. Make sure the ignition switch is OFF.
2. Remove the left side cover (page 44).
3. Remove the bolt (1) and battery holder (2).
4. Disconnect the negative (–) terminal lead (3)
from the battery first, then disconnect the positive
(+) terminal lead (4).
5. Pull out the battery (5) from the battery box.
Installation
1. Reinstall in the reverse order of removal. Be sure
to connect the positive (+) terminal first, then the
negative (–) terminal.
2. Check all bolts and other fasteners are secure.
(4)
(3)
(5)
(1) Bolt
(1)
(2) Battery holder
(3) Negative (–)
terminal lead
(4) Positive (+)
terminal lead
(5) Battery
(2)
Fuse Replacement
(Refer to the Safety Precautions on page 55.)
When frequent fuse failure occurs, it usually indicates
a short circuit or an overload in the electrical system.
See your Honda dealer for repair.
NOTICE
Never use a fuse with a different rating from that
specified. Serious damage to the electrical system or
a fire may result, causing a dangerous loss of lights
or engine power.
Blown fuse
XR250 TORNADO