Honda XR250 Tornado Manual Del Propietário página 175

78
Tighten the rear axle nut to specified torque:
P
Rear axle nut torque:
88 N.m (9.0 kgf.m; 65 lbf.ft)
Adjust the drive chain (page 71) and rear brake
P
pedal free play (page 30).
Apply the brake several times and check for free
P
wheel rotation after the brake pedal is released.
C
!
aution
If a torque wrench was not used for installation,
see your Honda dealer as soon as possible to verify
proper assembly. Improper assembly may lead to
loss of braking capacity.
Brake Pad Wear
(Refer to the Safety Precautions on page 55.)
Brake pad wear depends upon the severity of usage,
the type of riding, and road conditions. (Generally,
the pads will wear faster on wet and dirty roads.)
Inspect the pads at each regular maintenance interval
(page 56).
Front Brake
Check the cutout (1) in each pad. If either pad is worn
to the cutout, replace both pads as a set. See your
Honda dealer for this service.
Front brake
XR250 TORNADO
(1) Cutouts
(1)