Idiomas disponibles
Idiomas disponibles
The following show examples of connections commonly used to connect the DVD player to TV and other com-
ponents.
If using this DVD player to playback a DVD in a Dolby Digital 5.1 channel surround or DTS surround format, the
DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks. By
hooking the player up to a Dolby Digital or DTS decoder, you can enjoy more convincing, realistic ambience
with powerful and high-quality surround sound of a professional standard which can be heard in movie the-
aters. Use an audio optical or coaxial digital cable (not included) for the audio connections.
NOTES:
• Be sure to turn off the power to all components
in the system before connecting another component.
• Refer to the Instruction Manuals for your TV, stereo system and any other components
to be connected to
the DVD player.
Connection
to an audio system
Method 1 I
[ Method 2 I
Stereo
system
Audio Input Jacks
Analog Audio Out
AV amplifier with a built in decoder
(AV control center),
Dolby Digital decoder,
DTS decoder,
MD deck or DAT deck
Digital Audio Input
Jacks
m
AUDIO
OUT
Q
"--/
Digital
Audio
Out
• Method 1 DVD Player + Stereo system
• Method
2 DVD Player + AV amplifier with
MD deck or DAT deck
NOTES
(for
Method
2 only):
®
DO
DIGITAL OUT
a built in decoder (AV control center), Dolby Digital decoder, DTS decoder,
• When using an AV amplifier with a built in decoder (AV control center), Dolby Digital, or DTS decoder as shown in the
Method 2, set "DOLBY DIGITAl" or "DTS" to "ON" accordingly for audio output in the setup mode (Refer to page 24). Set it
to "OFF" for the decoder that is not used currently. Playing a DVD using incorrect settings may generate noise distortion,
and may also damage the speakers.
• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD
deck or DAT deck.
• Set "DOLBY DIGITAE' or "DTS" to "OFF" for audio output in the setup mode for connecting to an MD deck or DAT deck. (Refer
to page 24)
• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a
decoder, etc., that is not DTS-compatible.
• When playing a copyright-protected
96 KHz linear PCM DVD, the digital sound will be down sampled at 48 KHz, even if you
set "LPCM SELECT" to "OFF".
Optical cable (not supplied)
• Optical cable(not
Supplied) may be damaged when bent at Sharp angles. Ensure Cables are Coiled in oops with a diarne_
I ter °f 15 cm °r m°re when st°ring them"
I
I° Use a cable which is 3m °r sh°rter"
I
I• Insert cable plugs firmly into the connectors
when making connections.
I
L, if a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
J
- 13-
EN
