Care And Cleaning - Sharp R-890 Manual De Instrucciones

Horno microondas inversor con grill y conveccion
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34

CARE AND CLEANING

CAUTION: DO NOT USE COMMERCIAL OVEN
CLEANERS, STEAM CLEANERS, ABRASIVE,
HARSH CLEANERS, ANY THAT CONTAIN SODI-
UM HYDROXIDE OR SCOURING PADS ON ANY
PART OF YOUR MICROWAVE OVEN.
CLEAN THE OVEN AT REGULAR INTERVALS
AND REMOVE ANY FOOD DEPOSITS - Keep the
oven clean, or the oven could lead to a deterio-
ration of the surface. This could adversely affect
the life of the appliance and possibly result in a
hazardous situation.
Oven exterior
The outside of your oven can be cleaned easily
with mild soap and water. Make sure the soap is
wiped off with a moist cloth, and dry the exterior
with a soft towel.
Control panel
Open the door before cleaning to de-activate the
control panel.
Care should be taken in cleaning the control pan-
el. Use a cloth damp with water only, gently wipe
the panel until it becomes clean. Avoid using ex-
cessive amounts of water. Do not use any sort of
chemical or abrasive cleaner.
Oven Interior
1. For cleaning, wipe any splatters or spills with a
soft damp cloth or sponge after each use while
the oven is still warm. For heavier spills, use a mild
soap and wipe several times with a damp cloth
until all residues are removed. Do not remove the
waveguide cover.
Cleaning tip - For easier cleaning of your oven:
Place half a lemon in a bowl, add 300ml (1/2 pint) water and heat on 100% for 10 -12 minutes.
Wipe the oven clean using a soft, dry cloth.
R-890_OM_WEST.indb 27
2. Make sure that mild soap or water does not
penetrate the small vents in the walls which may
cause damage to the oven.
3. Do not use spray cleaners on the oven interior.
Keep the waveguide cover clean at all times.
The waveguide cover is constructed from a fragile
material and should be cleaned with care (follow
the cleaning instructions above).
NOTE: Excessive soaking may cause disintegra-
tion of the waveguide cover.
The waveguide cover is a consumable part and
without regular cleaning, will need to be replaced.
Door
To remove all traces of dirt, regularly clean both
sides of the door, the door seals and adjacent
parts with a soft, damp cloth. Do not use harsh
abrasive cleaners or sharp metal scrapers to clean
the glass oven door since they can scratch the sur-
face, which may result in shattering of the glass.
NOTE: A steam cleaner should not be used.
Glass flat tray
To remove all traces of dirt, regularly clean the
glass flat tray with a soft, damp cloth while the
glass flat tray is not so hot. For heavier spills, use
a mild soap and wipe several times with a damp
cloth until all residues are removed. Do not use
harsh abrasive cleaners or sharp metal scrapers to
clean the glass flat tray.
GB-27
2018-02-12 16:56:53
Tabla de contenido

Solución de problemas

loading

Tabla de contenido