Vornado 1303 Guia Del Propietario página 6

CORD MANAGEMENT
1. Wrap cord around Air Accelerator, located on back of unit.
Secure cord with three clips (G) located at 2, 6 and 10 o'clock
positions.
G
Air Accelerator
10 English
ADJUSTING HEIGHT (Models 6803 and 7803 Only)
1. Before adjusting the height of the circulator, support the circu-
lator head with one hand. Use your other hand to loosen the
height adjustment collar by gently rotating it counter-clockwise.
2. Slowly raise or lower the pole to the desired height and secure
into position by rotating the adjustment collar clockwise until tight.
CLEANING
GRILLE REMOVAL
Screwdriver required.
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grille.
Using a phillips head screwdriver, re-
move grille by unscrewing the 4 screws
located along the perimeter of the inlet
²
grille at roughly 2, 5, 7, and 11 o'clock
positions. This will release the grille. To
reattach, position grille so the logo in
the center of the grille is straight. Models
5303, 6303, 6803, 7503, 7803, align the
Locator Pin (A) to reconnect grille. Once
aligned replace screws.
Model 1303, align the Alignment Rib (B)
to reconnect grille. Once aligned replace
screws.
²
Use the brush attachment on your
household vacuum cleaner to
vacuum any accumulated dust off
the Front Grille and Air Inlets.
²
²
B
A
11
English