Sony DCR-SC100 Manual De Instrucciones página 90

Ocultar thumbs Ver también para DCR-SC100:
Others
Symptom
Cause and/or corrective actions
While editing using the DV connecting
cable, recording picture cannot be
monitored.
• Remove the DV connecting cable, and connect it
again.
The camcorder becomes warm.
• If the power of the cammcorder is on for a long time,
it becomes warm, which is not malfunction.
• Something is blocking the infrared rays.
4 Remove the obstacle.
• The battery is not inserted with the correct polarity.
4 Insert the battery with the correct polarity, (p. 108)
• The batteries are dead.
4 Insert new ones, (p. 108)__
• Disconnect the connection plug on the battery pack or
on the AC power adaptor, then reconnect it in about 1
minute. Turn the power on. If the functions still do
not work, press the RESET button at the lower left of
the LCD screen using a sharp-pointed object. (If you
press the RESET button, all the settings including the
date and time return to the default.) (p. 105)_
The numbers or letters of 5 characters is
• Self-diagnosis function was activated,
displayed as a counter.
4 See the table in page 94 and treat the camcorder
appropriately.
AC power adaptor
i, ' •
,
. ..
..
'
'-fef-
•:
*■<
:
Symptom
Corrective actions
The VTR/CAMERA or CHARGE lamp
• Disconnect the power cord. After about 1 minute,
does not light.
reconnect the power cord. (p. 7)
The CHARGE lamp flashes.
• See the chart on the next page.
The supplied Remote Commander does
not work.
No function works though the power is
on.
loading

Este manual también es adecuado para:

Ac-v615