Idiomas disponibles
Idiomas disponibles
· Teeth are dull. This is caused by hitting a hard
object such as a nail, and dulling the teeth on
one side. The blade tends to cut to the side
with the sharpest teeth.
· Base is out of line or bent.
· Blade is bent.
· Edge guide or straight edge is not being used.
IF THE BLADE BINDS OR SMOKES FROM FRICTION
· Blade is dull.
· Blade is on backwards.
· Blade is bent.
· Workpiece is not properly supported.
· Incorrect blade is being used.
E N G L I S H •
TECHNICAL DATA
VOLTAGE-FREQUENCY
NO LOAD SPEED
BLADE DIAMETER
BLADE SHAFT DIAMETER
CUTTING CAPACITY:
at 90˚
BEVEL CUTTING CAPACITY:
at 45˚ (Max.)
POWER
WEIGHT
U s er 's M an u al
120 V ~ 60 Hz
5 000 r/min
7 1/4" (185 mm)
4/5" (20 mm)
2 4/8" (64 mm)
1 7/8" (48 mm)
1 500 W
4,2 kg (9,25 lb)
25
