Idiomas disponibles
Idiomas disponibles
2.4.
Control panel
Figure 2 shows the control panel.
1
Figure
Control panel
2
No.
Component
1
Start button left
2
Start button right
3
Emergency stop
4
Display for announcements
and settings
5
(-) key to decrease the pressing
time
6
(+) key to increase the pressing
time
7
Program-key for pressing only
8
(-) key to decrease the rounding
time
9
(+) key to increase the rounding
time
DR Robot Variomatic | User manual
4
3
Function
With the start buttons left and right you give the general
start command. The work cycle will be automatically
completed. Press both start buttons simultaneously.
Pressing the emergency stop gives a stop command to
the machine. The message 'E5' appears on the display.
The emergency stop must only be used in emergencies.
Normally, the machine will end its cycle on its own by
working through the internal and entered external
parameters.
__
The pressing time can be changed by operating the keys
5 and 6, and is set in seconds
The value is depending on the amount of dough as well
consistency.
With Key 7 the machine will press only; the dough will
be pressed out only without cutting. In the display will
appear "PRS".
The amount of rounding can be set by changing the
timing through buttons 8 and 9; the longer the more
the dough will be stressed. The setting is depending
on type of dividing disc; the amount of dough as well
consistency.
40
18
5
6
7
8
9
10
11
12
19
13
14
15
16
17
2
www.daub.nl
