Costway SP37522DE Manual Del Usuario página 12

EN
5.You can increase the speed of running after a few minutes.
Press the "speed +"button on the upper display to increase the
speed slowly. You can also press the "speed -"key to slow it down.
6.In the process of movement, you can press the key "Start/Stop"
of the upper display to make the motor stop running anytime.
You can hold the phone in the phone holder and then play the
phone music after connecting via Bluetooth.
Note: When the safety key is pulled off, the treadmill will
immediately stop during exercise. The display will stop all
functions and shows E07.
Display window and button description
Display window
1. LED window displays the following functions：
Time/speed/distance/calorie window: 5 seconds to switch
display time, speed, distance and calorie data. Time display
range:0:00-99:59, distance display range:0.00-99.99, speed
display range 1-12, Calorie display range:0.00-999.9
Current Speed
START/STOP 1-12KM/H Display Speed
22
2. Display Functions Buttons: Start/Stop, Speed increasement
/Speed decreasement
A: "START/STOP": START the treadmill in stopping state, STOP the
treadmill in running state. Press the STOP key to slowly stop in the
running state.
B: "SPEED +": Speed increase key, it is the speed increase key in
the running state;
C: "SPEED -": Deceleration key, it is the deceleration key in the
running state;
1.Fix the safety key in the position provided under the display. Turn
the power switch on and the buzzer will sound, then the manual
mode will be activated.
2.Press the start button, the time window displays a countdown of
3seconds. One beep per second indicates the countdown. The motor
then starts.
3. Starting speed: 1Km/h, press speed + and - to adjust the speed.
4. Timing operation can be performed in normal mode, and the
speed is fixed and can be adjusted manually.
Pull off the safety lock in any state, the window displays "E07" and
the buzzer beeps three times.
The motor will stop immediately if the motor is working.
You can't start again when the safety lock falls off.
This system has a power saving function. The system will enter the
power saving mode if there is no keystroke command within 10mins
in the standby state, the display will automatically turn off,
SPEED +
SPEED - and it can be woken up when any key is pressed.
Start instructions
Safety lock function
Power saving mode
EN
23