Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Problem
Snags, holes,
tears, rips or
excessive wear
Control time
wrong or changes
Not enough water
Washer pauses
or has to be
restarted, or
washer door is
locked and will
not open
Door unlocks or
press START/
PAUSE and
machine doesn't
operate
Possible cause
• Overloaded
• Pens, pencils, nails,
screws or other
objects left in pockets
• Pins, snaps, hooks,
sharp buttons, belt
buckles, zippers and
sharp objects left in
pockets
• This is normal
• This is normal
• Pump clogged
• This is normal
• Incorrect operation
70
Solution
• The dry weight of the load should be
less than 18 kg.
• Remove loose items from pockets.
• Fasten snaps, hooks, buttons and
zippers.
• During spin the washer may need
to rebalance the load sometimes
to reduce vibrations. When this
happens, the estimated time is
increased causing time left to
increase or jump.
• Horizontal washers do not require
the tub to fill with water like top-
load washers.
• See page «Cleaning the Pump
Filter» on page 63 on how to
clean the Pump Filter.
• Front-load washers start up
differently than top- load washers,
and it takes 30 seconds to check
the system. The door will lock and
unlock.
• Simply open and close the door
firmly; then press
EN
.
