Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Problem
Clothes too wet
Incomplete cycle
or timer not
advancing
Possible cause
• Load is out of balance
• Pump clogged
• Overloading
• Drain hose is kinked or
improperly connected
• Household drain may
be clogged
• Drain hose siphoning;
drain hose pushed too
far down the drain
• Automatic load
redistribution
• Pump clogged
• Drain hose is kinked or
improperly connected
• Household drain may
be clogged
• Drain hose siphoning;
drain hose pushed too
far down the drain
68
Solution
• Redistributes clothes and run drain
& spin or rinse & spin.
• Increase load size if washing small
load containing heavy and light
items.
• The machine will slow the spin
speed down to 400 rpm if it has a
hard time balancing the load. This
speed is normal.
• See page «Cleaning the Pump
Filter» on page 63 on how to
clean the Pump Filter.
• The dry weight of the load should be
less than 18 kg.
• Straighten drain hose and make
sure washer is not sitting on it.
• Check household plumbing. You
may need to call a plumber.
• Ensure there is an air gap between
hose and drain.
• Timer adds 3 minutes to cycle for
each rebalance. 11 or 15 rebalances
may be done. This is normal
operation. Do nothing; the machine
will finish the wash cycle.
• See page «Cleaning the Pump
Filter» on page 63 on how to
clean the Pump Filter.
• Straight drain hose and make sure
washer is not sitting on it.
• Check household plumbing. You
may need to call a plumber.
• Ensure there is an air gap between
hose and drain.
EN
