Idiomas disponibles
Idiomas disponibles
B
Product usage
DISPLAY
START/PAUSE
Features
Usage counter
1.
Unplug the equipment for 10s and reconnect again.
2.
Power on and within 10s, please press «STEAM» and «DELAY» on control panel
simultaneously and continuously for around 5s until the device display shows digits --
the value can indicate the times of equipment usage.
3.
Repeat step 1 again and customer can resume to normal operation.
The Dispenser Drawer
Slowly open the dispenser drawer by pulling it out until it stops.
After adding laundry products, slowly close the dispenser drawer. Closing the drawer too
quickly could result in early dispensing of the bleach, fabric softener or detergent.
Displays the approximate
time remaining until the end
of the cycle.
NOTE: The cycle time
is affected by the water
pressure in your home and
the balance of the load in
the washer. You may see the
time remaining on the display
increase to accommodate a
slower spin speed to handle
unbalanced loads.
If you want add a garment,
please press the
button.
The washer will unlock the
door. Press again to restart
the cycle.
56
EN
Cycle status is also displayed
and certain features such
as Delay Wash or Steam are
shown indicating they have
been selected.
Display
Wash Time
Delay Time
End
Error
Remain-Delay
Child Lock
Door Lock
NOTE: In some cycles the
washer will drain first, then
unlock the door when it is
paused.
NOTE: The washer performs
automatic system checks
after pressing the
button.
You may hear the door lock
and unlock before water
flows, this is normal.
