Idiomas disponibles
Idiomas disponibles
A
Product overview
1.
The washer MUST be grounded. In the event of malfunction or breakdown, grounding will
reduce the risk of electrical shock by providing a path of least resistance for electrical
current.
2.
Since your washer is equipped with a power supply cord having an equipment-grounding
conductor and a grounding plug, the plug MUST be plugged into an appropriate, copper-
wired receptacle that is properly installed and grounded in accordance with all local
codes. If in doubt, call a licensed electrician. DO NOT cut off or alter the grounding prong
on the power supply cord. In situations where a two- slot receptacle is present, it is the
owner's responsibility to have a licensed electrician replace it with a properly grounded
grounding-type receptacle.
Water Supply Requirements
Cold water faucet MUST be installed within 107 cm of your washer's water inlet. The faucet
MUST be 1.9 cm garden hose-type so inlet hose can be connected. Water pressure MUST be
between 10 and 120 psi. Your water department can advise you of your water pressure.
Drain Requirements
1.
Drain capable of eliminating 64.3 L per minute.
2.
A standpipe diameter of 3.18 cm minimum.
3.
The standpipe height above the floor should be:
Minimum height: 61 cm
Maximum height: 120 cm
BACK
45
EN
120 cm
Max.
61 cm
Min.
