Idiomas disponibles
Idiomas disponibles
B
Product usage
7.
Attach the U-shaped hose guide to the end of the drain hose. Place the hose in a laundry
tub or standpipe and secure it with the cable tie provided in the enclosure package.
Note: Placing the drain hose too far down the drain pipe can cause a siphoning
action. No more than 17.78 cm of hose should be in the drain pipe. There must
be an air gap around the drain hose. A snug fit can also cause a siphoning action.
8.
Plug the power cord into a grounded outlet.
NOTE: Check to be sure the power is off at the circuit breaker/fuse box before
plugging the power cord into an outlet.
9.
Turn on the power at the circuit breaker/fuse box.
10. Read the rest of this Owner's Manual. It contains valuable and helpful information that
will save you time and money.
11. Before starting the washer, check to make sure:
• Main power is turned on.
• The washer is plugged in.
• The water faucets are turned on.
• The unit is level and all four leveling legs are firmly in the floor.
• The shipping support hardware is removed and saved.
• The drain hose is properly tied up.
12. Run the washer through a complete cycle.
13. If your washer does not operate, please review the Before You Call For Service section
before calling for service.
14. Place these instructions in a location near the washer for future reference.
Cable Tie
50
EN
Cable Tie
Cable Tie
