Oase PondJet Eco Puesta En Marcha página 18

Mooring to the bottom of the pond
• Determine the depth of the water and cut three nylon ropes to length (depth of the water plus
1 m).
• Attach the ends of the nylon ropes to the three holes in the float.
• Attach the other ends of the nylon ropes to a weight (approx. 20 kg).
• Position the unit in the water and lower the weight to the bottom of the pond.
• Ensure that the nylon ropes are not tensioned in order to allow for fluctuations in the water
level.
• The connection cable must be provided with strain relief.
Commissioning/start-up
Switching on: Connect the unit to the mains. The unit switches on immediately.
Switching off: Disconnect the unit from the mains.
Dynamic Function
NOTE
If the Dynamic Function is active, the EFC (Environmental Function Control) function is limited.
 The unit is not protected from running dry.
When it is switched on, Dynamic Function controls the pump and ensures a dynamic fountain
display.
How to proceed:
 I
• Slide the switch.
– ON: The function is activated.
– OFF: The function is deactivated.
18