Operation
Automatically storing stations
into memory (The automatic
preset mode: ASM)
I
Press the [BAND/ASM] button for
more than two seconds until a
beep is heard.
The automatic preset mode starts.
[ASM] will appear on the display, and
stations are automatically entered in
memory under buttons [1] to [6].
These
buttons
are
called
preset
buttons.
rnATTENTION
• Pressing the preset buttons ([1] to [6])
allows you
to
make one-touch
station
selections. The frequency of the selected
station is indicated on.
• When a new station is set in memory, the
station previously set in memory will be
deleted.
• If there are fewer than six receivable
stations, the stations set in the remaining
buttons will be retained.
If the vehicle's battery is disconnected (for
repairs to the vehicle or for removing the
main unit), all stations in memory will be
lost. In such a case, store stations in the
memory again.
32
Manually storing stations into
memory
Store a station to a preset button.
1
Press the [TRACK/SEEK] button to
tune to the station to be entered in
memory.
a
Select any button, from [1] to [6],
and press it for more than two
seconds.
The selected stations is now stored
in a preset button.
Repeat the above procedure to store
additional stations one at a time in
buttons [1] to [6], and store them in
memory.
CAUTION
If the vehicle's battery is disconnected (for
repairs to the vehicle or for removing the
main unit), all stations in memory will be
lost. In such a case, store stations in
memory again.
