Idiomas disponibles
Idiomas disponibles
to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
FOR CRIMPERS
• Use tool only as directed. Only trained personnel
should operate tool.
•
To reduce the risk of arc flash,
WARNING
electric shock and property
damage, work on deenergized lines when
possible. Tool is not insulated. Should work
on energized lines be required, ensure all proper
precautions, including those contained in NFPA
70E, have been taken first.
•Use tool only with compatible dies and connectors
for which they are rated. Jaws, dies, and connectors
must be used in an APPROVED COMBINATION to
achieve a successful operation. Improper combina-
tions can result in a faulty crimp. Electric shock,
fire, explosion, and property damage could occur.
•Keep hands away from crimping jaws while tool is
in use. Fingers could be crushed.
•To reduce the risk of injury, wear safety goggles
or glasses with side shields when operating or
servicing the tool.
•Inspect and discard workpieces with cracks or
wear before use. Materials may crack or shatter.
•Follow connector manufacturers' installation in-
structions. Other uses may cause damage to the
tool, accessories, and workpiece.
• Chemical Burn Hazard. Keep coin cell battery
away from children.
•
To reduce the risk of injury, when
WARNING
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
WARNING
property damage, work on deenergized
lines when possible. Tool is not
insulated. Should work on energized
lines be required, ensure all proper
precautions, including those contained
in NFPA 70E, have been taken first.
WARNING
in use. Fingers could be crushed.
To reduce the risk of injury, wear safety
goggles or glasses with side shields when
operating or servicing the tool.
Read operator's manual.
Underwriters Laboratories, Inc.
United States and Canada
FUNCTIONAL DESCRIPTION
2
1
13
11
12
1. Die release pins
2. Worklight LEDs
3. LED crimp indicator
4. Reverse button
5. Handle
6. Manual release
button
7. Hanger
3
To reduce the risk of arc
flash, electric shock and
Keep hands away from
crimping jaws while tool is
4
3
6
5
9
10
8. ONE-KEY™ coin
battery door
9. ONE-KEY™
indicator
10. Trigger
11. Jaw release lever
12. Jaw lock pin
13. Swinging jaw
7
8
