GE DVM1665 Manual De Instrucciones página 15

B
OUTSIDE BACK EXHAUST
INSTALLATION OVERVIEW
B1. Prepare Rear Wall
B2. Attach Exhaust Adapter
to Wall Plate
B3. Attach Mounting Plate
to Wall
B4. Prepare Top Cabinet
B5. Adjust Blower
B6. Mount the Oven
PREPARING THE REAR WALL
B1.
FOR OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for outside
exhaust.
1
Read the instructions on the REAR WALL TEMPLATE.
2 Tape it to the rear wall, lining up with the holes
previously drilled for holes A and B in the wall plate.
3 Cut the opening, following the instructions of the REAR
WALL TEMPLATE.
Installation Instructions
(Horizontal Duct)
15
ATTACH THE EXHAUST ADAPTER
B2.
TO THE OVEN REAR PANEL
Unscrew and remove the exhaust adapter assembly
1
from the top of the oven.
Attach the exhaust adapter to the oven rear panel
2
by sliding it into the guides at the top center
of the back of the oven.
Exhaust Adapter
Guide
Push in securely until it is in the lower locking tabs.
Take care to assure the damper hinge is installed so
that it is at the top and that the damper swings freely.
Exhaust
Adapter
Damper
(hinge side up)
Guide
Locking
Tabs