Adjust The Exhaust Adapter; Connecting Ductwork - GE DVM1665 Manual De Instrucciones

MOUNT THE OVEN
A4.
Cabinet Front
Cabinet Bottom Shelf
Oven Top
3
Attach the oven to the top cabinet by inserting
3 self-aligning screws through outer top cabinet
holes. Turn two full turns on each screw. Be sure
to keep power cord tight. Be careful not to pinch
the cord, especially when mounting flush to
bottom of cabinet.
4 Tighten the three screws to the top of the oven
completely. (While tightening screws, hold the oven
in place against the wall and the top cabinet.)
Install grease filters. See the Owner's Manual
5
packed with the oven.
Installation Instructions
(continued)
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
14

ADJUST THE EXHAUST ADAPTER

A5.
Open the top cabinet and adjust the exhaust adapter
to connect to the house duct.
Damper
A6.

CONNECTING DUCTWORK

1 Extend the house duct down to connect
to the exhaust adapter.
2
Seal exhaust duct joints using duct tape.
Back of
Oven
House Duct