Idiomas disponibles
Idiomas disponibles
ENGLISH
External cleaning of the appliance
Door handle
Enamelled
surfaces
Glass cover
for the interior
lighting
Door gasket.
Do not remove
it.
Stainless steel
door cover
(depending on
model)
Accessories
Side guides
Extraction
system
(telescopic
guide)
Important
Slight differences in colour in the front part of the device are caused by the use of different
-
materials, like glass, plastic, and metal.
The shadows on the door panels, which look like stripes, are due to reflections from the
-
interior lighting.
Enamel is made at very high temperatures. This can cause a slight colour variation. This
-
is completely normal and does not affect the device operation. The edges on thin trays
cannot be completely enamelled. As a result, these edges can be rough. This does not
affect the corrosion protection.
Always keep the device clean and immediately remove the dirt so that the appliance does
-
not accumulate lasting dirt residues.
78
BOLERO HEXA SM406000 EDGE+ A+ / BOLERO HEXA SM406000 GLASS BLACK A+ / WHITE A+ / GREY A+
Hot water with neutral soap:
Wipe it with a kitchen cloth and then dry it with a soft cloth.
If water softener comes into contact with the door handle, immediately
clean it. Otherwise, you will not be able to remove the stains.
Check the instructions on how to clean the oven interior surfaces.
Hot water with neutral soap:
Wipe it with a kitchen cloth and then dry it with a soft cloth.
If the interior is very dirty, use a specific oven cleaner.
Hot water with neutral soap:
Clean it with a kitchen cloth. Do not rub the gasket.
Specific cleaner for stainless steel:
You must follow the product's manufacturer instructions.
Remove the door cover to clean it.
Hot water with neutral soap:
Immerse them in water and clean them with a kitchen cloth or a brush.
If there are large dirt remains, use a stainless-steel scouring pad.
Hot water with neutral soap:
Immerse them in water and clean them with a kitchen cloth or a brush.
Hot water with soap:
Clean it with a kitchen cloth or brush.
Do not remove lubricant while the removal guides are spread out. The
best solution is to clean the system when the guides are not spread out.
Do not wash it in the dishwasher.
