Idiomas disponibles
Idiomas disponibles
ENGLISH
Note
1. Make sure you introduce accessories always in the right direction.
2. Place the accessories inside up to the inside rear wall, so that they do not touch the oven
door.
Tilt/fall protection
Accessories can be removed approximately up to halfway without tipping. When you introduce
the rack, make sure it is placed in the right direction, as shown in figure 9.
Efficient energy consumption
Remove every unnecessary accessory during the cooking and baking process. Try to open
-
the door as little as possible during the baking process.
If you open the door during cooking, the mode will change to "Light bulb". The temperature
-
setting will not change.
Reduce the temperature setting in non-fan modes to 50 °C 5 to 10 minutes before the end
-
of the baking time. The interior heat will help you complete the cooking process.
Use the fan heating function if possible. You can reduce the temperature between 20 °C
-
and 30 °C. You can cook and bake using fan heating at more than one height at the same
time. If it not possible to cook and bake different dishes at once, you can heat one after the
other with the preheating mode.
It is not necessary to preheat the oven when it is empty.
-
If necessary, place the food in the oven immediately after reaching the desired temperature;
-
the light indicator will go out.
Do not use reflective foil to cover the interior. Use moulds or oven cookware with a dark
-
matt finish and light weight. Try not to use heavy accessories with shiny surfaces, like
aluminium or stainless steel.
Health risk
Acrylamide is mainly produced by heating starchy foods (e.g., potatoes, chips, bread, etc.) at
very high temperatures for a long time.
Tips
Use short cooking times.
-
Cook food until its surface is brown, do not allow it to burn or get dark brown colours.
-
Larger portions contain less acrylamide.
-
Use the fan heating mode if necessary.
-
5. CLEANING AND MAINTENANCE
Make sure that the oven is switched off and disconnected from the mains before cleaning.
76
BOLERO HEXA SM406000 EDGE+ A+ / BOLERO HEXA SM406000 GLASS BLACK A+ / WHITE A+ / GREY A+
