Wear Parts; Troubleshooting - Oase Complete Filter Kit 1300 Instrucciones De Uso

- English -
Storage/Winterization
● Put the unit out of operation at water temperatures below 46 °F (8 °C) or, at the latest, when freezing temperatures are
to be expected.
● Thoroughly clean the unit, check for damage.
● Store immersed in water or filled with water. Do not immerse the power plug in water!
● Ensure that the storage place is inaccessible to children.

Wear parts

The filter foam and impeller is a wear part and is excluded from the warranty.
Disposal
Do not dispose of this unit with domestic waste! Disable the unit beforehand by cutting off the cables. Further
information about the recycling of this product can be obtained from your local municipal authority.

Troubleshooting

Issue Cause
The unit is not Power supply not connected
operating
Pump is not completely submerged
Insufficient flow Filter housing clogged
Tubing blocked
Tubing kinked
Excessive flow loss in the
tubing due to friction
Impeller blocked
Unit switches Pump running dry
off after a short
running period
Water temperature too high
Solution
Connect pump power supply
Completely submerge pump in the water
Clean
Clean or replace tubing
Eliminate kink, replace tubing if it is damaged
Reduce tubing length to reduce frictional loss
Clean impeller
○ Check supply lines for blockages
○ Vent tubing
○ Check connections for leaks
Maximum water temperature: +95 F° (+35 °C)
8