NOTICE! Damage hazard
•
Ensure that the voltage specification on the data plate is the same as the voltage specifica-
tion of the power supply.
•
Use cable ducts to lay cables through walls with sharp edges.
•
Do not lay loose or bent cables next to electrically conductive materials.
•
Do not pull on the cables.
Operating the device safetly
WARNING! Electrocution hazard
Always disconnect the power supply when working on the device.
CAUTION! Risk of injury
Do not touch the device during operation. The device contains hot and cold components, moving
parts, and electrical items which may cause injury.
NOTICE! Damage hazard
Avoid strong vibrations. The device will not work properly if it is exposed to strong vibrations.
5
Target group
The mechanical and electrical installation and setup of the device must be performed by a qualified
technician who has demonstrated skill and knowledge related to the construction and operation
of automotive and household equipment and installations, and who is familiar with the applicable
regulations of the country in which the equipment is to be installed and/or used, and has received
safety training to identify and avoid the hazards involved.
6
Intended use
The under-bench air conditioner is intended to be installed in motor homes, caravans, and other vehicles with
habitation compartments.
The under-bench air conditioner is not suitable for installation in:
•
Houses and apartments
•
Trucks and passenger vehicles
•
Construction machinery, agricultural machinery, or similar equipment
•
Boats and cruise liners
•
Trains and airplanes
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor
installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible
failure.
16