Mitsubishi Electric TRANE TPKA0A 1HA70 Serie Manual De Instrucciones página 10

3. Operation
<To Change the Airflow's Up/Down Direction>
<For IR wireless remote controller>
With the unit running, press the Airflow Up/Down button
• Each press changes the direction. The current direction is shown at
.
6
• The change sequence, and the available settings, are as follows.
Remote controller
Swing
IR Wireless
remote controller
4. Timer
Timer functions are different by each remote controller.
For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.
5. Emergency Operation for IR wireless remote controller
(For TPKA0A . 1HA70 )
When the IR wireless remote controller cannot be used
When the batteries of the IR wireless remote controller run out or the IR
wireless remote controller malfunctions, the emergency operation can be
done using the emergency buttons.
[Fig. 5-1] DEFROST/STAND BY lamp (Orange)
A
Operation lamp (Green)
B
Emergency operation switch (cooling/heating)
C
Receiver
D
6. Care and Cleaning
■
Filter information
Fri
83
Room
Cool Set temp. Auto
83
Mode Temp. Fan
en
Main Main menu
Maintenance
RETURN SELECT
MENU
HOLD
9
6
Display
1 2 3
C
E.O.
SW
B
A
D
Fig. 5-1
will appear on the Main display
in the Full mode when it is time to
clean the filters.
Wash, clean, or replace the filters
when this sign appears.
Refer to the indoor unit Instruc-
tions Manual for details.
Select "Maintenance" from the Main
menu, and press the [SELECT/
HOLD] button.
ON
OFF
3.6. Ventilation
► For LOSSNAY combination
as necessary.
 The following 2 patterns of operation is available.
• Run the ventilator together with the indoor unit.
• Run the ventilator independently.
Note:
 With some model configurations, the fan on the indoor unit may come on
even when you set the ventilator to run independently.
4
Note: (for IR wireless remote controller and RF thermostat)
 Running the ventilator independently is not available.
 No indication on the remote controller.
• Each press of the emergency operation switch will toggle the operation
mode.
• Check "COOL/HEAT" with the operation monitor display. (The orange
lamp follows this monitor display for 5 seconds after pressing the
A
emergency operation switch.)
[Heat pump type]
Cooling
Operation Monitor Display
GREEN ORANGE
STOP
COOL
HEAT
: Turning off
Note:
• Details of emergency mode are as shown below.
Operation mode
Set temperature
Fan speed
Airflow direction
Maintenance menu
Error information
Filter information
Cleaning
Main menu: RETURN
Cursor
C
RETURN SELECT
MENU
[Cooling only type]
Heating Stop
The orange lamp follows the
switch operation as indicated
at the left for 5 seconds, and
then it will return to the normal
display.
: Lighting
COOL
24°C, 75°F
High
Step 1
Select "Filter information" from the
Maintenance menu, and press the
[SELECT/HOLD] button.
ON
OFF
HOLD
B
A
D
Cooling
Stop
HEAT
24°C, 75°F
High
Step 5