Home Decorators Collection MATTEO 56044 Guía De Uso Y Mantenimiento página 7

Assembly - Standard Ceiling Mount
1
Preparing for mounting
□
Remove the canopy bottom cover (C) from the canopy (B) by
turning the bottom cover counterclockwise until it unlocks.
□
Loosen the two canopy screws (FF) located in the bottom of the
mounting bracket (A).
□
Turn the canopy (B) counterclockwise to remove the mounting
bracket (A) from the canopy (B).
A
FF
B
C
3
Assembling the fan
CAUTION: To ensure wobble-free operation and to avoid
damage to the fan, the ball/downrod assembly (D) and
the set screw (RR) must be completely tightened.
NOTE: This fan is equipped with a safety tab (SS).
Should the set screw (RR) ever become loose while the
fan is running in reverse, the safety tab (SS) will engage
and stop the fan from falling.
□
Remove the set screw (RR) by turning it counterclockwise.
□
Install the ball/downrod assembly (D) by inserting it into the mo-
tor collar (TT), and turning it clockwise until it is tight.
□
Reinstall the set screw (RR) by turning clockwise until tight.
2
Routing the wires
□
Route the wires exiting the top of the fan motor assembly (F)
through the center of the coupler cover (E) and the canopy
bottom cover (C).
□
Make sure the opening of the canopy (B) is on top and insert
the ball/downrod (D) through the canopy (B).
□
Route the wires exiting the top of the fan motor assembly (F)
through the ball/downrod (D) as shown.
D
B
C
E
F
D
B
C
E
SS
F
7
Please contact 1-800-986-3460 for further assistance.
TT
RR
HOMEDEPOT.COM/HOMEDECORATORS