Idiomas disponibles
Idiomas disponibles
EN
Contact
For technical or repair service advice, please contact the helpline on
(+44) 1935 382 222
Web: tritontools.com/en-GB/Support
Address:
Toolstream Ltd.
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
Storage
•
Store this tool carefully in a secure, dry place out of the reach of children
Disposal
Always adhere to national regulations when disposing of power tools that are no
longer functional and are not viable for repair.
•
Do not dispose of power tools, or other waste electrical and electronic equipment
(WEEE), with household waste
•
Contact your local waste disposal authority for information on the correct way to
dispose of power tools
Troubleshooting
Problem
Possible Cause
No function when
ON/OFF Switch (1) is
Defective ON/OFF
operated
Sanding sheet too fine
Slow material removal
Sanding sheet too
Scratches on
workpiece after
Not enough material
sanding
Sanding sheet
incompatible with
Burn marks on
workpiece
Too much pressure
exerted on to the
Dust extraction not
working; sanding sheet
not aligned with dust
extraction holes in the
Sanding Base Plate
(7); extraction holes
Excessive dust
emission
Dust Collection Pot (6)
Dust Collection Pot
insufficient for the task
tritontools.com
Solution
No power
Check power supply
Have the ON/OFF
Switch replaced by an
Switch
authorised Triton
service centre
Fit new sanding sheet
or worn
with coarser grit
Fit new sanding sheet
coarse
with finer grit
Continue sanding
removed
Fit correct sanding
sheet
material
Use less pressure
whilst moving the
sander
machine
Realign sanding
sheet; unblock dust
extraction holes
blocked
Empty Dust Collection
full
Pot
Connect a vacuum
dust extraction system
at hand
Guarantee
To register your guarantee visit our web site at
tritontools.com* and enter your details.
Purchase Record
Date of Purchase:
___ / ___ / ____
Model: TQTRSS
Retain your receipt as proof of purchase
Triton Precision Power Tools guarantees to the purchaser of this product that
if any part proves to be defective due to faulty materials or workmanship within
3 YEARS from the date of original purchase,
Triton will repair, or at its discretion replace, the faulty part free of charge.
This guarantee does not apply to commercial use nor does it extend to normal
wear and tear or damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights
Australian Warranty Information
You may wish to register your product at www.tritontools.com but you are not
under any obligation to do so.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
This product is guaranteed against faulty materials and workmanship for
3 YEARS from the date of purchase. Please retain your receipt as proof of
purchase.
This warranty does not cover defects caused by or resulting from:
(a) misuse, abuse or neglect;
(b) trade, professional or hire use;
(c) repairs attempted by anyone other than our authorised repair centres; or
(d) damage caused by foreign objects, substances or accident.
Warranty Exclusions
Wearing parts, consumable items or service-related parts required when
performing normal and regular maintenance of this product are not covered by
the warranty unless it is found to be defective by an Authorised Service Centre.
Distributed in Australia by Carbatec
Carbatec Pty Ltd
128 Ingleston Road
Wakerley, QLD 4161
Enquiries
Email: [email protected]
Freecall number: 1800 658 111
The Carbatec policy is one of continuous improvement and the company
reserves the right to alter designs, colours and specifications without notice.
Original Instructions
7
