Idiomas disponibles
Idiomas disponibles
For best cleaning results, the dust bag
should be changed often. The CHECK
BAG indicator will turn to red when the
bag needs to be changed or the airflow is
blocked.
NOTE
: See REPLACEMENT PARTS for
part number and purchase details (page 6).
1. Turn off and unplug vacuum cleaner.
2. Remove hose from canister.
3. Squeeze the hood release button, then
lift canister hood.
4. Pull bag out of the bag mount.
NOTE:
The bag mount will flip forward
after removing bag. This will prevent
the hood from closing until a new bag is
installed.
Bag Mount
5. Check the motor safety filter and clean
or, if necessary replace. See MOTOR
SAFETY FILTER CLEANING (page 19).
DUST BAG CHANGING
- 18 -
Motor
Safety
Filter
NOTE:
DO NOT bend or crease the
middle of the cardboard when installing
the bag into the bag mount slots.
6. Rotate bag mount down and install
bag into slots per illustration, pushing
down until the cardboard tab locks into
position and the holes align.
Bag Mount
7. Tuck the bag securely into the bag
cavity so that none of the bag will be
pinched by the hood.
8. Close and latch canister hood.
9. Insert hose into canister until it snaps in
place.
10. Plug cord into wall outlet.
