Building in
• Do not hold or carry the appliance by the door handle. The door
handle cannot hold the weight of the appliance and may break off.
1. Carefully push the microwave into the box, making sure that it is in
the centre.
2. Open the door and fasten the microwave with the screws that were
supplied.
Fully insert the appliance and centre it.
Do not kink the connecting cable.
Screw the appliance into place.
Important information with plug
Electrical connection
The appliance is fitted with a plug and must only be connected to a
properly installed earthed socket. Only a qualified electrician who
takes the approriate regulations into account may install the socket or
replace the connecting cable. If the plug is no longer accessible
following installation, an all-pole isolating switch must be present on
the installation side with a contact gap of at least 3 mm.
Contact protection must be ensured by the installation.
Fuse protection: see instructions for use-technical data.
EN 23