Idiomas disponibles
Idiomas disponibles
English
16
Remove the filter grille.
1
Take out the washable HEPA 13 filter.
2
Rinse the pleated side of the HEPA 13 filter under a hot slow-
3
running tap.
Hold the filter in such a way that the pleated side points upwards and
-
the water flows parallel to the pleats. Hold the filter at an angle so that
the water washes away the dirt inside the pleats.
Turn the filter 180° and let the water flow along the pleats in opposite
-
direction.
Continue this process until the filter is clean.
-
Never clean the washable filter with a brush.
Note: Cleaning does not restore the original colour of the filter, but does restore
its filtration power.
Carefully shake the water from the surface of the filter. Let the filter
4
dry at least 2 hours before you put it back into the vacuum cleaner.
