Idiomas disponibles
Idiomas disponibles
Step
Description
The controller indicates an existing connection to the
9
wireless network (Wi-Fi) by a sporadic flashing of the
"Data transmission" indicator near the main display.
Check the connection with the wireless network
(Wi-Fi) by calling up the ROHDE myKiln app with a
smartphone, tablet or computer. If not already done,
connect your controller to the app using the
10
controller's access code (see Section 8.2.2). If you
now start a firing with the controller, you should see
this in the app or be able to send firing programs from
the app to the controller.
8.1.5.
Establishing a connection manually with a wireless network router
The following description explains how to manually connect the kiln controller to a wireless network (Wi-Fi) using a
smartphone, tablet or computer. First, the controller and a smartphone, tablet or computer are connected for a limited
time using an access point. The controller searches for the wireless connection, and the paired smartphone, tablet or
computer is used to display and select the wireless connection.
Notes:
⇒ The procedure described below is used if using a wireless network router without a WPS button (WPS
function),
⇒ or if the connection is to be set up over a secure wireless network in a large building or school/educational
facility.
Establishing a connection:
Step
Description
1
Switch off the control unit.
f
Press the
key and switch on the
2
control system.
Press and hold the
4
switching on.
Press and hold the
5
appears on the main display.
f
6
Release the
Use a smartphone, tablet, or computer
7
to manually search for a wireless network
(Wi-Fi) or access point.
f
key when
f
"
"
AP
key until
key.
70 / 293 - EN -
Remark
Remark
"
"
AP
1)
stands for access point.
2)
The control unit creates its own wireless network.
3)
The wireless network via the access point is time-
limited and is closed each time the controller is
switched off.
1)
The smartphone, tablet or computer must have Wi-Fi
enabled and then scan for new devices.
2)
You can search for available networks in the system
settings on your smartphone, tablet or computer.
3)
The control system and a smartphone, tablet or
computer must be in close proximity.
