Rohde ST 310 Instrucciones De Uso página 56

5.1.3. Quick start guide
Step Action
Switching on the controller
Switch on the unit by pressing the selector switch on the bottom and wait for the kiln temperature
1
to be displayed.
Calling up & starting or ending the firing program
2 Check the set program values before each program start.
3
Call up the firing programs with the
f
4
Use the
5
Start the selected firing program with the
6
End the firing process by pressing the
Changing the firing program
7
Call up the firing programs again with the
8
You can call up the firing data again with the
9
You can change the firing data with the
g
10
Press the
11
You can switch back to the previous value with the
j
With the
12
entered changes are automatically saved.
5.1.4. Setting the date & time
General information
• A battery-backed real-time clock for the date and time display is installed in the controller.
• It compensates for leap years.
• The changeover from summer to winter time must be performed manually.
• The internal battery has a service life of approximately 10 years.
Setting the date & time
Step Display
Setting the date
1
2
3
X
d
or keys to select the firing program.
key to move on to the next firing value.
key, you can exit programming mode and start the firing process immediately; all
Description
Switch off the control unit.
h
Press the key and switch on the
control system.
h
Press and hold the
switching on.
key.
j
key. The indicator lamp above the
j
key again. The indicator light above the
X
key.
g
key.
f d
or keys.
h
key.
Remark
You must not perform any firing process
while setting the time and date.
key when
54 / 293 - EN -
j
key lights up.
j
key goes out.