Idiomas disponibles
Idiomas disponibles
No.
Display
100
9
1000
10
00. 15
11
FULL
12
20
13
d
f
*Press and hold the
or
Indicator
Meaning
2. Enter heating rate
Rmp
Enter end temperature
Tmp
Enter soak time at end
temperature t
Enter cooling rate Rmp
Exit program memory
key while entering to quickly toggle between the displayed values.
Description
•
Press the
ramp rate.
2
•
The ramp rate appears on the main display
as:
"
1
999
–
rate) or
•
Press the
program step.
• Press the
2
temperature.
• The temperature appears on the main
display as:
on the kiln model and its maximum
temperature.
• Press the
program step.
• Press the
soak time.
• For technical reasons, there is a point
between the hours and minutes in the
display and not a colon, as is usually the
2
case with times.
• The ramp rate appears on the main display
as:
"
00.00
• The kiln temperature and the remaining
soak time appear alternately on the display
at intervals of 15 seconds during the soak
period.
•
Press the
program step.
•
Press the
cooling rate.
•
The cooling rate appears on the main
display as:
(uncontrolled cooling rate) or
3
(program end).
•
If you do not enter
rate, the heating elements are switched off,
and the kiln starts to cool down naturally.
•
If you do not enter
the cooling rate, the temperature control in
the controller will be terminated at 150 °C,
and the main display will then show the
end of the firing. Alternatively, you can end
the firing by pressing the
•
Press the
input.
The program memory is exited, and the
controller returns to the default display on the
main display.
60 / 293 - EN -
d
f
and
keys to select the
"
FULL
(°C/h),
(maximum ramp
END
(program end).
g
key to select the next
d
f
and
keys to select the
0
1400
"
"
–
(°C). This depends
g
key to select the next
d
f
and
keys to select the
99.59
"
–
(h.min).
g
key to select the next
d
f
and
keys to select the
"
1
999
FULL
–
(°C/h),
END
FULL
in the cooling
END
(program end) in
j
key.
g
key to complete the program
