MACHINE-SPECIFIC SAFETY INSTRUCTION
Safety warnings for drills and screwdrivers
Hold the power tool by the insulated gripping surfaces when performing an operation
where the fastener may contact hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool conductive and could give the operator an electric shock
Use appropriate detectors to determine if utility lines are hidden in the work area or
call your local utility company for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes
property damage or may cause an electric shock.
Switch off the power tool immediately when the tool becomes blocked or stuck. Be
prepared for high reaction torque that can cause kickback. The tool becomes blocked when:
• the power tool is subjected to overload
• or it becomes wedged in the workpiece.
Hold the machine with a firm grip. High reaction torque can briefly occur while driving in and
loosening screws.
Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more
secure than by hand.
Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light
alloys can burn or explode.
Always wait until the machine has come to a complete stop before placing it down. The
tool insert can jam and lead to loss of control over the power tool.
Avoid unintentional switching on. Ensure the trigger is in the off position before inserting
battery pack. Carrying the power tool with your finger on the trigger or inserting the battery
pack into power tools that have the switch on invites accidents.
Safety Warnings for battery chargers
For indoor use only.
Keep the battery charger away from rain or moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
Do not charge other batteries. The battery charger is suitable only for charging the batteries
that were supplied with your power tool. Otherwise there is danger of fire and explosion.
Keep the battery charger clean. Contamination can lead to danger of an electric shock.
Before each use, check the battery charger, cable and plug. If damage is detected, do not
use the battery charger. Never open the battery charger yourself. Have repairs performed
only by a qualified technician. Damaged battery chargers, cables and plugs increase the risk
of an electric shock.
7