Dsp5D; Frequency Response - Yamaha PM5D Manual De Instrucciones

DSP5D

❏ Frequency Response
Input Output
INPUT 1-48
OMNI OUT 1-24
ST IN 1-4
❏ Gain Error
Input Output
INPUT 1-48
OMNI OUT 1-24
ST IN 1-4
Internal OSC
❏ Total Harmonic Distortion
Input Output
INPUT 1-48
OMNI OUT 1-24
ST IN 1-4
Internal OSC
* Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz
❏ Total Harmonic Distortion
Input Output
INPUT 1-48
OMNI OUT 1-24
ST IN 1-4
Internal OSC
* Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz
❏ Hum & Noise
Input Output
INPUT 1-48
OMNI OUT 1-24
ST IN 1-4
All INPUT
—
* Hum & Noise are measured with a 6 dB/octave filter @12.7 kHz; equivalent to a 20 kHz filter with infinite dB/octave attenuation.
Manual de instrucciones de PM5D/PM5D-RH V2 / DSP5D
Fs= 44.1kHz or 48 kHz @20 Hz-20 kHz, referenced to the nominal output level @1 kHz
Fs= 88.2 kHz or 96 kHz @20 Hz-40 kHz, referenced to the nominal output level @1 kHz
RL
600Ω GAIN: Max.
Fs= 44.1 kHz, 48 kHz, 88.2 kHz or 96 kHz@1 kHz
RL
Input level: –62 dBu, GAIN: Max. → Output level: +4.0 dBu (Typ.)
Input level: +10 dBu, GAIN: Min. → Output level: +4.0 dBu (Typ.)
Input level: –62 dBu, GAIN: Max. → Output level: +4.0 dBu (Typ.)
600Ω
Input level: +10 dBu, GAIN: Min. → Output level: +4.0 dBu (Typ.)
Full scale output, Output level: +24.0 dBu (Typ.)
Fs= 44.1 kHz or 48 kHz
RL
+4 dBu @20 Hz–20 kHz, GAIN: Max
+4 dBu @20 Hz–20 kHz, GAIN: Min
600Ω +4 dBu @20 Hz–20 kHz, GAIN: Max
+4 dBu @20 Hz–20 kHz, GAIN: Min
Full scale output @1 kHz
Fs= 88.2 kHz or 96 kHz
RL
+4 dBu @20 Hz–40 kHz, GAIN: Max
+4 dBu @20 Hz–40 kHz, GAIN: Min
600Ω +4 dBu @20 Hz–40 kHz, GAIN: Max
+4 dBu @20 Hz–40 kHz, GAIN: Min
Full scale output @1 kHz
Fs= 44.1 kHz, 48 kHz, 88.2 kHz or 96 kHz, EIN=Equivalent Input Noise
RL
Rs= 150Ω, GAIN: Max
Master fader at nominal level and one Ch fader at nominal level.
(When controlled by PM5D or PM5D Editor)
Rs= 150Ω, GAIN: Min
Master fader at nominal level and one Ch fader at nominal level.
(When controlled by PM5D or PM5D Editor)
Rs= 150Ω, GAIN: Max
Master fader at nominal level and one Ch fader at nominal level.
600Ω
(When controlled by PM5D or PM5D Editor)
Rs= 150Ω, GAIN: Min
Master fader at nominal level and one Ch fader at nominal level.
(When controlled by PM5D or PM5D Editor)
Rs= 150Ω, GAINs: Min
Master fader at nominal level and all ch1-48 in faders at nominal level.
(When controlled by PM5D or PM5D Editor)
Residual output noise, ST master off.
Conditions
Conditions
Conditions
Conditions
Conditions
Sección de referencia
Min. Typ. Max. Unit
–1.5 0.0 0.5 dB
Min. Typ. Max. Unit
–2.0 0 +2.0
–2.0 0 +2.0
–2.0 0 +2.0 dB
–2.0 0 +2.0
–0.5 0 +0.5
Min. Typ. Max. Unit
0.1
0.05
0.1 %
0.05
0.02
Min. Typ. Max. Units
0.12
0.05
0.12 %
0.05
0.02
Min. Typ. Max. Unit
–128
EIN
–62
–81 –76
–128
EIN
dBu
–62
–81 –76
–62
–86
391