Sending A Telephone Call; Keypad Selection (List/Buffered Dialing) - Motorola MCS 2000 I Manual Del Usuario

English
MCS 2000 Model I
Press the phone button (7) to answer the call.
Exit the function when the conversation is over.

Sending a Telephone Call

List Selection
Press the menu button (9) and use the mode selector (D)
until PHONE is displayed. Press the select button (13)
and use the mode selector (D) until the desired name or
number is displayed. Press the select button (13) or the PTT (F). The radio then transmits the number.
Note: If your radio has been so programmed, you
can press the phone button for quick access to
the telephone interconnect function. Using the
mode selector (D), you can scroll between last
dialled call and phone number lists.

Keypad Selection (List/Buffered Dialing)

(with optional keypad microphone)
Press the phone button (7) or select the menu PHONE
as previously described, then enter the desired
number directly from the keypad. If you are placing a
call to a local extension number requiring a pause
before it, press
#
If an incorrect phone number is entered, the digits
may be erased using the mode selector (D) down.
.
Continue using the mode selector (D) down to erase
the entire number.
When the number is complete, press the select button
(13) or the PTT (F) to transmit the call.
PLS WAIT
will be in the display, while the system is setting up the
call.
Trunking only:
If the PHONE system is busy, the display will show
PHN BUSY
and your call will be placed when the system is availa-
ble, unless you exit the function.
If phone access is unavailable to your radio, the dis-
play shows
NO PHONE
page 8
68P81083C05-C