Idiomas disponibles
Idiomas disponibles
10. Insert nail (KK) into the hole of the base. Hammer it in
until the it stands straight, and tighten it into ground with
a wrench.
HARDWARE USED
KK
M8 x 149 mm Nail
1 1. Connect the preassembled regulator assembly from burner
assembly (C) to a 20-lb. LP-gas cylinder (sold separately).
Line up threads on cylinder fitting with those on regulator
and rotate clockwise until tight.
HAND TIGHTEN ONLY. DO NOT USE ANY HAND TOOLS TO
MAKE THIS CONNECTION. Be careful not to cross threads
when screwing in fitting.
To disconnect the LP-gas cylinder, first make sure the
cylinder valve is in the "OFF" position. Then, turn the knob
on the regulator assembly counterclockwise until it is loose.
WARNING: Before connecting, be sure there is no debris
caught in the head of the LP-gas cylinder regulator valve or
in the head of the burner and burner ports.
10
X 1
11
8
Outdoor Patio Heater
Operating Instructions and Owner's Manual
