Idiomas disponibles
Idiomas disponibles
7.
Feed the regulator & hose assembly and connect upper
pole (D) to the lower pole (F).
7.1. Feed the regulator & hose assembly into and through
the lower pole assembly.
7.2. Screw upper pole (D) onto lower pole (F) until the
holes on upper pole (D) are aligned to the holes on top of
lower pole (F). Secure them together by using three M5 x
10 mm bolts (DD). Ensure they are fully tightened.
HARDWARE USED
DD
M5 x 10 mm Bolt
8. Attach KD domes (B) to each other using M5 nuts (GG)
and M5 x 8 mm silver bolts (FF). Complete dome assembly
by attaching top dome (A) to KD domes (B) using M5 nuts
(GG) and M5 x 8 mm silver bolts (FF).
HARDWARE USED
FF
M5 x 8 mm Silver Bolt
GG
M5 Nut
9.
Attach dome assembly to burner assembly (C) by securing
wing nuts (II) to reflector spacers (BB).
HARDWARE USED
II
Wing Nut
7
X 3
8
X 12
X 12
9
X 3
7
Outdoor Patio Heater
DD
GG
FF
A
Operating Instructions and Owner's Manual
D
F
B
GG
FF
II
BB
C
