MrHeater SunRite MH48PH Instrucciones De Uso Y Manual Del Usuario página 6

4. Attach lower pole (F) to cylinder assembly (G) using M6 x
10 mm bolts.
Note: Ensure the pole is straight. Then put the deck ring
(E) through the lower pole on top of cylinder assembly (G)
to cover connection.
HARDWARE USED
EE
M6 x 10 mm Bolt
5. Insert reflector spacers (BB) into the top of burner assembly
(C).
HARDWARE USED
BB
Reflector Spacer
6. Thread the regulator & hose assembly preassembled to
burner assembly (C) through the upper pole (D).
6.1. Thread the regulator & hose assembly into and
through the upper pole (D).
6.2. Screw burner assembly (C) onto upper pole (D) until
the holes on bottom of burner assembly (C) are aligned to
the holes on top of upper pole (D). Secure them together
by using three M5 x 10 mm bolts (DD). Ensure they are
fully tightened.
HARDWARE USED
DD
M5 x 10 mm Bolt
4
X 4
5
X 3
6
X 3
6
Outdoor Patio Heater
F
E
EE
G
BB
C
C
D
Operating Instructions and Owner's Manual
Back
DD