TRAPP ES-500 Manual De Instrucciones página 28

Electric
ES-500
ES-550
Gasoline
Diesel
Electric
ES-600
ES-650
Gasoline
Diesel
Environmental conditions limits:
Note: 1) The machines come out from the factory without switch (on/off) and electric motor connection, being at the
customer's discretion connecting it in the desired voltage, as available in the region. The motor connection
scheme is made available in the motor itself, so that the customer may proceed with the connection.
Note: TRAPP makes no warranty for the motor being damaged due to reversed or wrong connection, as described in the manual.
To define the pulley to be used on the motor, proceed in the following matter: disk pulley diameter
multiplied by disk rotation and divided by the specified rotation on the motor plate.
Formula: Disk pulley diameter x Disk Rotation -> (chart above)
Example: If the motor is 2 poles (3,545 rpm):
Note: Rounding the diameter of the pulley, should be used a pulley with diameter 100 mm.
28
Technical Characteristics
220/440
5 and 7,5 cv 1)
220/380
13.5 to 16 HP
(Briggs & Stratton)
–
15 HP a 17HP
(TRAPP / Lifan)
to
–
7 8 HP
220/440
7.5 and 10 cv
1)
220/380
13.5 to 16 HP
(Briggs & Stratton)
–
15 HP a 17HP
(TRAPP / Lifan)
to
–
8 10 HP
Motor rotation
215x1,600 = 344,000
3,545 3,545
Mono-
phase
Three-
phase
2
–
–
220
Mono-
phase
Three-
phase
3
–
–
Temperature: 40 °C
Air relative humidity: 80%
= 97 mm (motor pulley's diameter)
www.trapp.com.br
B-85 2 1,600 3
B-81 3 1,600 3
1,400 /
5,000
2,000 /
7,000